Eco-friendly materials and molding silicone molding silicone products plus purposes: to mold to cast epoxy resin, polyester resin, polystyrene, vinyl, wax, large concrete structures, culture stone, concrete, etc., but also for metal crafts, alloy automotive and other precision mold manufacturing, food-grade mold manufacturing. Description: Canada is a two-component silicone molding and molding silicone material that can be cured at room temperature can also be heat cured. Has a moderate viscosity, can flow to irrigation cast and brush characteristics. After adding a special mold components made of silica gel in the highest temperature up to 300-500 ℃, has good dimensional stability, low linear shrinkage, heat sealed environment does not restore features. This product is a two component, 1: 1 with the use. Add molding silicone Features: AC low shrinkage, the crosslinking process does not release low molecular weight, so the volume is constant, the shrinkage rate of less than 0.1%; without limitation product thickness, depth can be cured; has excellent heat resistance, temperature can be reach 300-500 degrees; food-grade, non-toxic, odorless, through FDA food grade certification; high tensile strength, tear strength, turn mode more often; good fluidity, easy perfusion; can also be heat cured at room temperature curing, easy to operate. Add molding Product Data Sheet Product Model Appearance (Color) Hardness (Shore A °) Viscosity (CPS) tear strength (kgf / cm) Tensile strength (kgf / cm2) Elongation (%) A: B added ratio ( %) Operation time (h) Curing time (h) Y-600 # translucent 0 ± 2 1000 ± 500 2 ± 1 15 ± 5 600 ± 50 1/1 0.5-1 4-6 Y-605 # 5 ± translucent 2 2000 ± 500 8 ± 1 25 ± 5 550 ± 50 1/1 0.5-1 4-6 Y-610 # Translucent 10 ± 2 3000 ± 1000 12 ± 2 30 ± 10 550 ± 50 1/1 0.5-1 4 -6 Y-615 # Translucent 15 ± 2 4000 ± 1000 14 ± 2 45 ± 10 550 ± 50 1/1 0.5-1 3-5 Y-620 # Translucent 20 ± 2 5000 ± 1000 20 ± 2 50 ± 10 500 ± 50 1/1 0.5-1 3-5 Y-625 # Translucent 25 ± 2 6000 ± 1000 22 ± 2 55 ± 10 500 ± 50 1/1 0.5-1 3-5 Y-630 # Translucent 30 ± 2 7000 ± 1000 24 ± 2 60 ± 10 450 ± 50 1/1 0.5-1 3-5 Y-635 # Translucent 35 ± 2 8000 ± 1000 12 ± 2 65 ± 10 450 ± 50 1/1 0.5-1 3 -5 Y-640 # Translucent 40 ± 2 9000 ± 1000 10 ± 2 70 ± 10 450 ± 50 1/1 0.5-1 3-5 Y-645 # Translucent 45 ± 2 10000 ± 1000 10 ± 2 75 ± 10 400 ± 50 1/1 0.5-1 3-5 Note: where hardness of Shore GB hardness, viscosity units cp, tear units of kg / cm, tensile units kg / cm2. Can also be adjusted according to customer special requirements of production plus silicone molding purposes: to mold to cast epoxy resin, polyester resin, polystyrene, vinyl, wax, large concrete structures, culture stone, concrete, etc., but also with metal crafts, alloy automotive and other precision mold manufacturing, food-grade mold manufacturing. Add molding silicone Key Features: How to use: A, B two components by weight of 1: 1 mix, after vacuum degassing can be watered. At room temperature (28 degrees) 30 minutes operating time, 2-3 hours to fully cure; heating 60-120 degrees, can be completely cured in a few minutes. Storage and precautions: When the operation to and used silicone condensation separate containers, use an unused room to operate this silicone silicone tool. Storage period of six months.